How to pair a handset to a W60B Base

How to pair a handset to a W60B Base

How to pair a handset to W60B


Step 1:   When the handset LCD screen prompts "Unregistered", long press image.png on the base station until the registration LED indicator flashes.
w60b connect

Step 2:   Press the "Reg" key (top left - button) on the handset or press the OK soft key on the handset and then select Register Handset.

Step 3:   Select the desired base station and then press the OK soft key.

Step 4:   Enter the PIN: 2584

Step 5:   Wait for the confirmation that it was paired.

 

 

Web – www.allyadvantage.com

Phone – 611 or 256-740-3900  helpdesk@allyadvantage.com

  1. How to Connect the W60B and your new phones CSC

    • Related Articles

    • Troubleshooting W60B/W70B Network Base & Cordless Handsets

      Network Base - W60B/W70B Status Lights All 3 status lights will be solid green when the base is functional. The Handset light will blink green when the base is searching for handsets. The Network light will blink green when the base is trying to ...

    • How to Setup Yealink WH6X Headsets for Training Mode

      The primary headset you use every day must be the same model as the headset you are trying to pair for training mode. • Check that your headset's docking base is connected to your PC with a USB cable. • If you do not already have Yealink USB Connect ...

    • Enable Wi-Fi on Yealink T5 W series phones

      Objective Enable Wi-Fi on the Yealink W series phones Applies To Yealink T53W Yealink T54W Yealink T57W Yealink T58W Procedure For Non Touch Screen models (T53W,T54W) Press Menu Select Settings and press Enter Select Basic Settings and press Enter ...

    • Troubleshooting an offline Yealink W60B DECT Wireless base station

      Troubleshooting an offline Yealink W60B DECT Wireless base station Confirm status If all lights are green, skip to step 3. Check Connections The device can be powered without a power cord if the network connection is connect by a PoE (power over ...

    • Yealink USB Connect - DECT Headset Management

      Installing the Application Download the application here: Yealink USB Connect Navigating Yealink USB Connect When your headset is detected, you will see the below screen. Click the device you wish to manage: If you see the below error that says "No ...