Ally Fiber Internet, powered by AT&T
AT&T BGW320 Connections & Light Status
AT&T BGW320 LED Information -Customer Connections LAN Ports There are 4 ports, a single 5Gb port and three (3) 2.5Gb ports Cabling CAT6 or CAT6a cabling is recommended Support above 1Gb Most devices will only support 1Gb connections, but some newer ...
AT&T Gateways - IP Configurations
Determine if there is a static IP address available Verify if a static IP has been loaded to the AT&T gateway AT&T does not always properly load the IP address to the modem or they may load different IP addresses than the ones provided to us prior to ...
AT&T Gateways - Enabling Remote Access
Enabling Remote Access To enable remote access you will need the Access Code. Browse to the IP address of the gateway. Default: 192.168.1.254 Click on the Remote Access tab. Enter the Access Code. This is on the device on a sticker. Create a password ...
AT&T BGW210 & BGW320 Gateways - Client Setup for New Gateway
Overview This article uses the BGW210/BGW320 model gateway as an example but is similar to some other models. There will be differences with varying models and some use Pinhole Mode or DMZ Plus. Objectives Gain access to the AT&T Gateway's admin ...